MigratoryData Server
Installation Guide
Version 5.0
December 19, 2021
Copyright © 2007-2021 Migratory Data Systems. ALL RIGHTS RESERVED.
THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THE DOCUMENT. MIGRATORY DATA SYSTEMS MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT DESCRIBED IN THIS DOCUMENT AT ANY TIME.
This guide describes the installation of MigratoryData Server. It is recommended to read MigratoryData Architecture Guide before reading this document for a better understanding of the concepts and to have a more comprehensive background.
This guide is part of the documentation set for MigratoryData Server version 5.0.
Written in Java, MigratoryData Server runs on all major operating systems: Linux/Unix, Mac OS, Windows, and potentially any other platform having support for OpenJDK Java Runtime Environment (JRE) version 8 or later.
MigratoryData Server comes with 64-bit installers for RPM-based and DEB-based Linux distributions. Also, a platform-independent tarball is available.
The recommended operating systems for production deployments are Red Hat Enterprise Linux or Centos 6 or later and Debian 7 or later.
You need to install Java Runtime Environment (JRE) version 8 or higher on your system before you can install and run MigratoryData Server.
The recommended JRE is OpenJDK version 8.
In a production environment it is recommended to have a server with at least 4 CPU cores, but the recommendation can grow to more CPU cores depending on the load of data on the server and how much simultaneous clients will be connected.
Note -- For development or small deployments there are no special requirements concerning CPU. You can use any decent workstation hardware.
In a production environment it is recommended to have 8 GB or more memory depending on the load of data on the server and how much simultaneous clients will be connected.
Note -- For development or small deployments it is recommended to have at least 512 MB memory.
You can estimate the hardware and the number of MigratoryData Server instances required for your use case by using MigratoryData Benchmark Kit, a software tool able to:
The installation procedure described in this section has been tested on Red Hat Enterprise Linux and CentOS 64-bit distributions.
As discussed in Section 2.2.1, the Java Runtime Environment (JRE) version 8 (or later) is required for running MigratoryData Server. To install the JRE version 8 of OpenJDK, run as root:
yum install java-1.8.0-openjdk-headless
Validate your installation with the following command:
java -version
The output should be something like:
openjdk version "1.8.0_181"
OpenJDK Runtime Environment (build 1.8.0_181-8u181-b13-2 deb9u1-b13)
OpenJDK 64-Bit Server VM (build 25.181-b13, mixed mode)
Download the RPM package of MigratoryData Server and run as root the following command to install it:
rpm -vi migratorydata-Version-Architecture.rpm
This will deploy MigratoryData Server as follows:
| Location | Description |
| /etc/migratorydata/migratorydata.conf | The default configuration file. Please refer to MigratoryData Configuration Guide, Section "Using Configuration File", to learn how to customize it |
| /etc/sysconfig/migratorydata | The default system configuration file. Please refer to MigratoryData Configuration Guide, Section "Using Environment Variables", to learn how to customize it |
| /var/log/migratorydata/ | The logs folder |
| /usr/share/migratorydata/ | The folder which contains the object code of MigratoryData Server as a JAR file |
| /usr/share/migratorydata/extensions | The folder which contains the extensions of MigratoryData Server |
| /usr/bin/migratorydata | A script used by the init.d daemon script |
| /etc/init.d/migratorydata | The init.d daemon script used to start, stop, and restart the MigratoryData Server service |
| /usr/share/doc/migratorydata | Folder containing docs, examples, and licenses |
After installation:
/etc/init.d/migratorydata start
/etc/init.d/migratorydata stop
/etc/init.d/migratorydata restart
/etc/init.d/migratorydata status
http://localhost:8800
If a browser is not available on the machine where MigratoryData Server has been installed, then, supposing the address of the machine is push.example.com and the port 8800 is not blocked by the firewall of the machine, you can remotely test the installation by opening the following URL from a remote machine connected to push.example.com:
http://push.example.com:8800
This will open the home page of MigratoryData Server which contains docs and examples.
To upgrade MigratoryData Server to a newer version, run as root the following command:
rmp -vU migratorydata-NewVersion-Architecture.rpm
Note -- The upgrade process will preserve your customized configuration files to ensure the continuity of your service. A copy of the default configuration of the new version is also provided with the extension .rpmnew if it differs from the default configuration of the installed version.
To remove MigratoryData Server from your system, run as root the following command:
rpm -ve migratorydata
The installation procedure described in this section has been tested on Debian and Ubuntu 64-bit distributions.
As discussed in Section 2.2.1, the Java Runtime Environment (JRE) version 8 (or later) is required for running MigratoryData Server. To install the JRE version 8 of OpenJDK, run as root:
apt-get install openjdk-8-jre-headless
Validate your installation with the following command:
java -version
The output should be something like:
openjdk version "1.8.0_181"
OpenJDK Runtime Environment (build 1.8.0_181-8u181-b13-2 deb9u1-b13)
OpenJDK 64-Bit Server VM (build 25.181-b13, mixed mode)
Download the DEB package of MigratoryData Server and run as root the following command to install it:
dpkg -i migratorydata-Version-Architecture.deb
This will deploy MigratoryData Server as follows:
| Location | Description |
| /etc/migratorydata/migratorydata.conf | The default configuration file. Please refer to MigratoryData Configuration Guide, Section "Using Configuration File", to learn how to customize it |
| /etc/default/migratorydata | The default system configuration file. Please refer to MigratoryData Configuration Guide, Section "Using Environment Variables", to learn how to customize it |
| /var/log/migratorydata/ | The logs folder |
| /usr/share/migratorydata/ | The folder which contains the object code of MigratoryData Server as a JAR file |
| /usr/share/migratorydata/extensions | The folder which contains the extensions of MigratoryData Server |
| /usr/bin/migratorydata | A script used by the init.d daemon script |
| /lib/systemd/system/migratorydata.service | The systemd unit file for the the MigratoryData Server service |
| /usr/share/doc/migratorydata | Folder containing docs, examples, and licenses |
After installation:
systemctl start migratorydata
systemctl stop migratorydata
systemctl restart migratorydata
systemctl status migratorydata
http://localhost:8800
If a browser is not available on the machine where MigratoryData Server has been installed, then, supposing the address of the machine is push.example.com and the port 8800 is not blocked by the firewall of the machine, you can remotely test the installation by opening the following URL from a remote machine connected to push.example.com:
http://push.example.com:8800
This will open the home page of MigratoryData Server which contains docs and examples.
To upgrade MigratoryData Server to a newer version, run as root the following command:
dpkg -i migratorydata-NewVersion-Architecture.deb
Note -- The upgrade process will preserve your customized configuration files to ensure the continuity of your service. A copy of the default configuration of the new version is also provided with the extension .dpkg-dist if it differs from the default configuration of the installed version.
To remove MigratoryData Server from your system, run as root the following command:
dpkg -purge migratorydata
The installation procedure described in this section has been tested on Windows, Linux, and Mac OS platforms.
As discussed in Section 2.2.1, the Java Runtime Environment (JRE) version 8 (or later) is required for running MigratoryData Server. To install the JRE version 8 of OpenJDK, follow the specific instructions for your operating system.
Download and extract the tarball distribution of the MigratoryData Server to any folder. You will have the following layout in your installation folder:
| Location | Description |
| doc | Folder containing the documentation set for MigratoryData Server |
| html | Folder containing the home page of MigratoryData Server including documentations and examples |
| logs | The logs folder |
| THIRD-PARTY-LICENSES | Folder containing the licenses of the third-party components embedded in MigratoryData Server |
| LICENSE.txt | Use of MigratoryData Server is subject to the license terms defined by this file |
| migratorydata.conf | The default configuration file. Please refer to MigratoryData Configuration Guide to learn how to customize it |
| migratorydata.jar | The object code of MigratoryData Server |
| extensions | The folder which contains the extensions of MigratoryData Server |
| README.txt | A short introduction to the product |
| start-migratorydata.bat | The start script of MigratoryData Server for Windows systems |
| start-migratorydata.sh | The bash start script of MigratoryData Server for Linux/Unix systems |
After installation:
start-migratorydata.bat (Windows)
./start-migratorydata.sh (Linux/Unix)
http://localhost:8800
If a browser is not available on the machine where MigratoryData Server has been installed, then, supposing the address of the machine is push.example.com and the port 8800 is not blocked by the firewall of the machine, you can remotely test the installation by opening the following URL from a remote machine connected to push.example.com:
http://push.example.com:8800
This will open the home page of MigratoryData Server which contains docs and examples.